Filter
Top Products
236
Various Other Settings
9.
Touvch <OK>.
The data from floppy disk will be copied to USB
memory.
When the copy is completed, a message will indicate
“Completed,” and you will return to the System screen.
If the floppy disk drive or USB memory is not
connected correctly, a screen like the following will
appear.
fig.++-+++
Set the ATELIER’s television format to match the television
format of the television, video camera, or DVD player that is
connected.
Change this setting if the image is not correctly shown on the
television, or if the image from your video camera or DVD
player is not displayed correctly.
Set this to the broadcast format used in your area.
1.
Touch <System> on the Main screen.
The System screen appears.
2.
Touch <Utility>.
fig.00-38.eps
3.
Touch <Video>.
The Video screen appears.
4.
Touch <Options>.
The Video Option screen appears.
5.
Touch the NTSC/PAL setting to switch between
“NTSC” and “PAL.”
6.
Touch <Exit>.
This setting remains stored in memory even while power is
turned off.
Video-related Settings
Specifying the Television Format
NOTE
Setting
NTSC, PAL
NTSC and PAL
Both of these are the names of color television broadcast
standards.
NTSC is used in North America and a number of other
countries including Japan. PAL is used in many regions,
including Europe and Asia.
AT-900_e.book 236 ページ ２００７年９月７日 金曜日 午前８時４３分