Filter
Top Products
222
Various Other Settings
Transmission of PC (Program Change) numbers can be
switched ON/OFF when a Registration is selected.
1.
Touch <System> on the Main screen.
The System screen appears.
2.
Touch < >< > to display the Send PC
Switch.
fig.00-37.eps
3.
Touch the Send PC Switch setting to switch
between “ON” and “OFF.”
Each time you touch the Send PC Switch setting, it will
alternate between “ON” and “OFF.”
4.
Touch <Exit>.
This setting remains stored in memory even while power is
turned off.
You can specify the Program Change number that will be
transmitted from MIDI Out when a Registration is selected.
1.
Touch <System> on the Main screen.
The System screen appears.
2.
Touch < >< > to display the Bank MSB
(Bank Select MSB), Bank LSB (Bank Select LSB),
or PC Number (Program Change Number).
fig.00-37.eps
3.
Touch either <Bank MSB>, <Bank LSB>, or <PC
Number> setting.
fig.09-28.eps
4.
Touch < >< > to change the setting.
5.
Touch <Exit>.
Enabling Transmission of PC Numbers
Setting
Descriptions
ON
PC numbers are transmitted
OFF
PC numbers are not transmitted
Setting the PC Number
Menu
Setting
Bank MSB
0–127
Bank LSB
0–127
PC Number
1–128
AT-900_e.book 222 ページ ２００７年９月７日 金曜日 午前８時４３分