Filter
Top Products
20
Step 6
Assigning Various Controls to the ASSIGN Knob,
z Press the OVERALL
▲
or
▼
button repeatedly
until the dark bar at the left of the display is
directly opposite “KNOB ASSIGN” or “RIB-
BON CONTROLLER ASSIGN.”
x Change the assignment for the selected
controller by using the OVERALL +/-
buttons.
ASSIGN Knob/RIBBON CONTROLLER Function List
* These functions can be assigned only to the RIBBON CONTROLLER.
** These functions are effective regardless of the Part Select setting. (See page 60.)
*** These Function parameters are effective only for the Main voice, regardless of the Part Select settings.
Description
This is the same parameter as controlled by the CUTOFF knob (page 61).
This is the same parameter as controlled by the RESONANCE knob (page 61).
This determines the depth of the Reverb effect. (See page 34.) Turning the
knob also automatically turns on Reverb, if it was originally turned off.
This determines the depth of the Chorus effect. (See page 35.)
This determines the depth of the DSP effect. (See page 36.)
This creates a vibrato-like pitch wavering effect.
This determines the “attack” of the sound — or, in other words, how long it
takes for the sound to reach full volume when a note is played. For certain
percussive sounds, this may have little or no audible effect.
This determines how long the sound sustains after a note is released. For
certain percussive sounds, this may have little or no audible effect.
This determines the position of the sound in the stereo image (left, center, or
right).
This determines the volume (level) of the sound.
This is the same parameter as controlled by the GROOVE knob (page 61).
This makes both subtle and dramatic changes in the Pattern by altering the
level of the individual notes. This affects the entire Pattern.
This determines the amount or strength of the level change in the Dynamics
parameter (#09, above). This affects the entire Pattern.
This determines both the tempo and the pitch of the entire DJX sound, affect-
ing all Parts of the Pattern and all voices.
This determines the speed of the Arpeggiator function. (See page 37.)
Function Name Display Name
Cutoff Frequency * Cutoff
Resonance * Resonanc
Reverb Send Level RevLevel
Chorus Send Level ChoLevel
DSP Send Level DspLevel
Modulation Mod
Attack Time Attack
Release Time Release
Pan Pan
Volume Volume
Groove * ** Groove
Dynamics ** Dynamics
Dynamics Strength ** Strength
Turntable ** Turntbl
Arpeggiator Speed *** ArpSpeed
Currently assigned control or function.
ASSIGN Knob and RIBBON CONTROLLER —
Changing the Assignment
ASSIGN Knob and RIBBON CONTROLLER —
Changing the Assignment
DEMO START
DEMO START
For more information on the
ASSIGN knob and RIBBON
CONTROLLER, see pages 63, 66.
014
001 142
VOICE
MEASURE
STYLE
Turntbl
Currently selected controller.