Filter
Top Products
63
ASSIGN KNOB
ASSIGN KNOB
The ASSIGN knob, as its name suggests, can be assigned to one of a wide
variety of functions — twelve in all — that are not available on the other
knobs.
1 Select KNOB ASSIGN in the Overall menu. (Press one of the OVERALL
▲
/
▼
buttons, repeatedly if necessary.)
2 Select the Assign parameter. (Use the OVERALL +/- buttons.)
3 Use the ASSIGN knob in the same way as the other knobs. (Need a refresher
course? See “Fast Track,” page 59.)
1 Select KNOB ASSIGN in the Overall menu.
Press one of the OVERALL
▲
/
▼
buttons, repeatedly if necessary, until KNOB
ASSIGN is selected. (The dark bar at the left of the display should be
directly next to “KNOB ASSIGN” on the panel.)
2 Select the Assign parameter.
Use the OVERALL +/- buttons to select the parameter to be controlled by
the ASSIGN knob.
• The default setting for the
ASSIGN knob is #09
Dynamics.
• Selecting a Part is not
necessary and has no effect
for the following param-
eters:
• Dynamics
• Dynamics Strength
• Turntable
• Arpeggiator Speed
These parameters are
already set to affect a
certain Part or Parts.
The following chart lists and briefly explains the parameters.
09
Dynamics
VOICE
STYLE
001 142
MEASURE
Indicates Knob Assign is selected.
DEMO START
THE KNOBS