Filter
Top Products
65
• Want to use another one of these param-
eters at the same time?
Remember that the same parameters are also
available on the RIBBON CONTROLLER. Simply
assign the desired parameter to the RIBBON
CONTROLLER. (See page 66.)
• Want to quickly switch among different
ASSIGN knob parameters?
Use the Performance Setup function to save the knob
assignment to one of the PERFORMANCE SETUP
buttons for instant recall. Keep in mind that other
important knob settings can also be saved. (See
page 56.)
On your own...
• Select voice #136 (“EthnicFl”). Select the Main Voice Part (with the PART SELECT keys) and try these
out:
• First, set the ASSIGN knob to control Attack, and set the knob to about 2:00. Notice how the abrupt
breathy attack of the sound has mellowed.
• Next, set the ASSIGN knob to control Release, and set the knob to about 3:00. Notice how the flute
has a far away reverberant sound, without the use of the Reverb effect.
• Select and play style #002 (TripHop). Select Percussion (with the PART SELECT keys), set the ASSIGN
knob to control Release, and try this out:
• Turn the knob to about 4:00 for a sustained electronic triangle sound.
• In this example, you can use both Dynamics and Dynamics Strength at the same time.
• Set the ASSIGN knob to control Dynamics Strength (#10). Then, set the RIBBON CONTROLLER to
control Dynamics (see page 67). Try pressing and holding down the RIBBON CONTROLLER in different
places while turning the ASSIGN knob to hear changes in the pattern.
THE KNOBS