Filter
Top Products
113
Changing the initial setting (SETUP mode)
CLK
SYNC OUT DRIVE
SCSI
AUTO A.PUNCH
SETUP
44.1kHz
Indicating the track number.
Indicating the number of
selected track events
CLK
SYNC OUT DRIVE
SCSI
AUTO A.PUNCH
SETUP
44.1kHz
CLK
SYNC OUT DRIVE
SCSI
AUTO A.PUNCH
SETUP
44.1kHz
Checking the number of track events
1. While the FD-8 is stopped, press the SETUP key to
enter SETUP mode.
2. Turn the JOG dial to select [NOs Event?] ([?]
flashes), and then press the EXECUTE/YES key.
The screen changes as follows, indicating the number of
events on track 1. (In this example, track 1 includes eight
events.)
3. Use the JOG dial to select another (01-24) to check
the number of events on the corresponding track.
4. Press the EXIT/NO key or the STOP button
repeatedly to exit SETUP mode.
To cancel the operation, or to restore the setting
obtained prior to the EXECUTE/YES key press, press
the STOP button or the EXIT/NO key. Each time you
press one of these keys, the FD-8 returns to the previous
hierarchy level of the menu, and finally exits SETUP
mode and displays the previous Time Base.
* For more information on audio files and events, refer to
the “Audio file and event” section of the ”Before Starting”
chapter.