Filter
Top Products
42
Punch In/Out Recording
1
2
-D
2
-E
2
-C
2
-A
2
-B
2
-F
2
-G
2
-H
When you finish storing and adjusting the edit points, you can proceed to the Auto Punch In/Out operation.
In this example, we re-record part of the guitar phrase that was already recorded on track 3.
First follow the “Preparation” below, then rehearse, and record a take.
Preparation
Connecting the instrument
1. Connect the guitar to input jack 1.
Microphones and some instruments require an input level
adjustment.
Connect these to input jacks 7 and 8 (unbalanced jacks
on the front panel or balanced connectors on the rear
panel) that are equipped with the LEVEL switches.
Setting the mixer section
2. Set up the mixer section as follows:
A
B
C
E
F
G
H
INPUT SEL switch
Input fader
Channel 1 PAN knob
MON knob
MON PAN knob
MON SELECTOR
Master fader L/R
Channel 1 -> [INPUT]
Channel 2-8 -> [OFF]
Channel 1 -> as you wish
Channel 2-8 -> [0]
[L] (Turn all the way to left.)
Channel 1-8 -> Turn toward [TRK].
Adjust the track monitor level.
Channel 1-8 -> Adjust for easier
monitoring.
Switch to [MON].
Rise up to [7-8].