Filter
Top Products
122
The actual send level is determined by multiplying
the send setting of each oscillator in the program
with the send setting of the timbre/track.
When you loaded data, a combination or song
does not sound correctly
• In the dialog box from which you saved the data,
did you check the check boxes for each item that
you wanted to save? ...........................................
☞p.46
• In the dialog box when saving the data, did you
check the check boxes for each item that you
wanted to save?
• Are the bank/number of the programs used by the
song the same as when the song was created?
Playback does not start when you press the
[START/STOP] key in Sequencer mode
• Is the GLOBAL 2.1: MIDI, MIDI page “MIDI Clock”
set to Internal?.............................................
☞PG p.129
Can’t record in Sequencer mode
• In the GLOBAL 1.1: System, Preference page, is the
Memory Protect “Song” check box unchecked?
........................................................................
☞PG p.127
• Is the GLOBAL 2.1: MIDI, MIDI page “MIDI Clock”
set to Internal?.............................................
☞PG p.129
Arpeggiator does not start
• Is the [ARP ON/OFF] key turned on (lit)?
• If the arpeggiator does not start for a combination
or song, make sure that “Arpeggiator Run” is
checked, and that an arpeggiator is selected for
“Assign.”..........................................
☞p.29, PG p.35, 82
• Is the GLOBAL 2.1: MIDI “MIDI Clock” parameter
set to Internal?.............................................
☞PG p.129
• If the [ARP ON/OFF] key does not respond in
GLOBAL 6.1: Arp.Pattern, you may have moved
here from Sampling mode or Media mode.
No sound when the [AUDIITON] key is turned on
• The Audition function is available only in Program
mode.
• If no sound is played when you turn on the
[AUDITION] key in Program mode, make sure that
the PROG 2.1: Ed-Basic, Audition page parameter
“Audition Riff” has not been turned Off.
............................................................................
☞PG p.9
• If no sound is played when you turn on the
[AUDITION] key in Sampling mode, check the
following points.
Is a sample correctly assigned to the currently
selected “Index”?
Are the “S (Start),” “LpS (Loop Start),” and “E
(End)” address settings correct?................
☞PG p.109
• If you are in the SMPL 2.1: Sample Edit, Edit2 page,
are the “S (Edit Range Start)” and “E (Edit Range
End)” settings correct?................................
☞PG p.100
RPPR does not start
• Is the SEQ 1.1: Play/REC “RPPR” setting checked?
.........................................................................
☞PG p.51
• Are “Assign,” “Pattern Select,” and “Track” set
correctly? ..............................................
☞p.75, PG p.73
• If the GLOBAL 2.1: MIDI “MIDI Clock” parameter
set to Internal? ............................................
☞PG p.129
You converted GM/GS/XG format SMF data and
played it in Sequencer mode, but it does not sound
correctly
• Execute “GM Initialize” to initialize the settings.
.........................................................................
☞PG p.54
• Is GLOBAL 1.1: System, Preference page “Bank
Map” set to GM?.........................................
☞PG p.126
• Make sure that the “Status” is INT or BTH.
................................................................
☞p.70, PG p.62
Settings for oscillator 2 are not displayed
• Make sure that the PROG 2.1: Ed–Basic, Prog Basic
page “Mode (Oscillator Mode)” parameter is set to
Double. ...................................................
☞p.51, PG p.5
Data is not transmitted from the MIDI OUT connec-
tor
• If MIDI data is being transmitted from the TR via
USB to your computer, transmission from the MIDI
OUT connector is halted. If the USB connection is
broken, transmission from the MIDI OUT connector
will resume.
This instrument does not respond to incoming MIDI
data
• Are all MIDI cables connected correctly?
..............................................................
☞p.12, PG p.233
• Is the MIDI data being received on the channel on
which it is being transmitted?...................
☞PG p.129
This instrument does not respond correctly to
incoming MIDI data
• Are the GLOBAL 2.1: MIDI, MIDI page MIDI Filter
settings “Enable Program Change,” “Bank,”
“Combi,” “Ctrl Change,” and “AfterT” each
checked? ......................................................
☞PG p.130
• If you wish to receive MIDI exclusive messages, is
the GLOBAL 2.1: MIDI, MIDI page MIDI Filter
“Exclusive” item checked? ........................
☞PG p.131
• Does this instrument support the types of messages
that are being sent to it?
Can’t format the SD card
• Does the media meet the requirements for use on
the TR?.................................................................
☞p.100
• Is the media inserted correctly? .........................
☞p.14
Can’t save/load data on an SD card
• Is the card inserted correctly? ............................☞p.14
• Is the card formatted?......................
☞p.100, PG p.156