Filter
Top Products
105
3. System settings
3-3. Button assignments
3-3-1. Setting the user buttons
The user can assign several functions which can be set using
the menu items into eight user buttons (U1 to U8).
The user buttons light in amber when the assigned function is
ON and are off when the assigned function is OFF.
Each time the user button is pressed, the function setting
alternates between ON and OFF.
The table below lists the functions which can be assigned to
the user buttons (U1 to U8).
Function name Description of function
Key PVW Output the key image to the preview output.
PinP PVW Outputs the PinP1 and PinP2 images
simultaneously to the preview output.
PinP1 PVW Output the PinP1 image to the preview output.
PinP2 PVW Output the PinP2 image to the preview output.
DSK PVW Output the DSK image to the preview output.
GPII-EN Enables or disables GPI-In.
GPIO-EN Enables or disables GPI-Out.
SHIFT Switches all the A/B bus and AUX bus
crosspoints between front and rear.
AUX Trans Enables or disables the AUX bus transitions.
PinP Trans Enables or disables the PinP bus transitions.
EFF DSLV Switches effect dissolve between ON and
OFF.
w Default settings
Button Function name Button Function name
U1 KEY PVW U5 AUX Trans
U2 PinP PVW U6 EFF DSLV
U3 DSK PVW U7 SHIFT
U4 PinP Trans U8 None
When a plug-in software application is introduced, the
functions inherent to that application are sometimes
added as the functions which are assigned.
: This function can be actuated in any model whose
system version is V2.00.00 and up.
These operations cannot be performed in a model
with a system version of below V2.00.00.
<Setting method>
1Press the s button to light its indicator, and display the
Config menu.
2Use [F1] to display the User Button1 sub menu and
User Button2 sub menu.
User Button1 sub menu
3Use [F2] to select the function to be assigned to the
[U1] button using the User1 item.
4Use [F3] to select the function to be assigned to the
[U2] button using the User2 item.
5Use [F4] to select the function to be assigned to the
[U3] button using the User3 item.
6Use [F5] to select the function to be assigned to the
[U4] button using the User4 item.
User Button2 sub menu
7Use [F2] to select the function to be assigned to the
[U5] button using the User5 item.
8Use [F3] to select the function to be assigned to the
[U6] button using the User6 item.
9Use [F4] to select the function to be assigned to the
[U7] button using the User7 item.
Use [F5] to select the function to be assigned to the
[U8] button using the User8 item.