Filter
Top Products
40
1. Basic operations
1-6. Key Link
This function makes it possible to link the “On” or “Off” setting
of the [DSK ON] button and PinP buttons ([PinP1 ON] and
[PinP2 ON]) with the “On” or “Off” (button indicator lights or
off) of the [KEY ON] button.
CUT
AUTO
MIX
MIX
WIPE
N/R
R
BKGD
KEY
KEY
ON
FTB
ON
PinP1
ON
PinP2
ON
DSK
ON
WIPE DIRECTION
WIPE
MIX
WIPE
1Press the s button to light its indicator, and display the
Config menu.
2Use [F1] to display the Operate sub menu.
3Use [F3] to select the link operation using the Key Link
item.
Off This releases the link with the [KEY ON]
button.
DSK This links the “On” or “Off” setting of the
[DSK ON] button with the “On” or “Off” setting
of the [KEY ON] button.
When the [DSK ON] button is “On”, the
[DSK ON] button remains “On” even when
the [KEY ON] button is set to “On”.
When the [DSK ON] button is “Off”, the
[DSK ON] button remains “Off” even when
the [KEY ON] button is set to “Off”.
There is no link with the auto transition
operation initiated by setting the [AUTO]
button to “On” when the [KEY] button has
been selected.
PinP1 This links the “On” or “Off” setting of the
[PinP1 ON] button with the “On” or “Off”
setting of the [KEY ON] button.
When the [PinP1 ON] button is “On”, the
[PinP1 ON] button remains “On” even when
the [KEY ON] button is set to “On”.
When the [PinP1 ON] button is “Off”, the
[PinP1 ON] button remains “Off” even when
the [KEY ON] button is set to “Off”.
There is no link with the auto transition
operation initiated by setting the [AUTO]
button to “On” when the [KEY] button has
been selected.
PinP2 This links the “On” or “Off” setting of the
[PinP2 ON] button with the “On” or “Off”
setting of the [KEY ON] button.
When the [PinP2 ON] button is “On”, the
[PinP2 ON] button remains “On” even when
the [KEY ON] button is set to “On”.
When the [PinP2 ON] button is “Off”, the
[PinP2 ON] button remains “Off” even when
the [KEY ON] button is set to “Off”.
There is no link with the auto transition
operation initiated by setting the [AUTO]
button to “On” when the [KEY] button has
been selected.
PinP1/2 This links the “On” or “Off” settings of the
[PinP1 ON] button and [PinP2 ON] button
with the “On” or “Off” setting of the [KEY ON]
button.
When the [PinP1 ON] button and
[PinP2 ON] button are “On”, the [PinP1 ON]
button and [PinP2 ON] button remain “On”
even when the [KEY ON] button is set to
“On”.
When the [PinP1 ON] button and
[PinP2 ON] button are “Off”, the [PinP1 ON]
button and [PinP2 ON] button remain “Off”
even when the [KEY ON] button is set to
“Off”.
There is no link with the auto transition
operation initiated by setting the [AUTO]
button to “On” when the [KEY] button has
been selected.