Filter
Top Products
61
1. Basic operations
1-11-1. Recording still images (Still)
1Press the v button to light its indicator, and display the
Video Memory menu.
2Use [F1] to display the Video Memory3 sub menu.
3Use [F5] to select “Off” using the Rec Lock item.
When the unit’s power has been turned back on
after it was turned off, the Rec Lock item setting is
restored to “On”.
4Use [F1] to display the Video Memory1 sub menu.
5Use [F2] to select “Still1” or “Still2” using the Select item.
6Use [F1] to display the Rec1 sub menu.
7Use [F2] to set the images to appear on the built-in
display using the Preview item.
On The image appearing on the built-in display is
forcibly switched to the image to be recorded
(AUX1 to AUX4 selected using the V Source
item) instead of the material selected by the
DISP bus.
Off The image source selected by the DISP bus
is displayed as a preview.
8Use [F3] to set the image to be recorded in the video
memory using the V Source item.
AUX1 to
AUX4
The output signals of the AUX buses (AUX1
to AUX4) are recorded as the material.
9Use [F5] to set the review display using the Review item.
On After the images have been recorded, the
images of the video memory recorded in the
AUX bus are displayed (for 2 seconds or so).
The next images can be recorded even
during review display.
Off The review display is not shown.
Use [F1] to display the Video Memory1 sub menu.
As soon as [F3] (Rec) is pressed, the still images are
recorded.
: This function can be actuated in any model whose
system version is V2.00.00 and up.
These operations cannot be performed in a model
with a system version of below V2.00.00.
If the [VMEM] button on the right of the number keys
is pressed and the video memory operation mode has
been established, the operation of this button is linked
with the [XPT/DSBL] button among the number keys.
When the recording of the still images is completed,
thumbnails of the still images are displayed in the
thumbnail screen.