Filter
Top Products
73
1. Basic operations
1-14. Setting the status display
Displaying the audio status
When the menu display mode has been set to “1 line of menu
display and full-screen image display”, the audio status of the
signals selected by the DISP bus is displayed on the WFM or
VECTOR screen.
When SDI input signals are selected:
The status of the embedded audio is displayed.
When PGM, PVW, MV or AUX signals are selected:
When “ON” has been selected as the ancillary data setting,
the status of the embedded audio is displayed.
-STATUS-
<Format>
1080/23PsF
<GROUP>
1,2,3,4
<RATE>
44.1KHz
<ACT>
1,2,3,4
5,6,7,8
Audio group
Audio rate
Audio channels
System formats used by the unit
Display System format
1080/59i 1080/59.94i
720/59p 720/59.94p
1080/24PsF 1080/24PsF
1080/23PsF 1080/23.98PsF
480/59i 480/59.94i
1080/50i 1080/50i
720/50p 720/50p
576/50i 576/50i