Filter
Top Products
110
3. System settings
3-8. Initialization
3-8-1. Initializing setting data
Initialization returns the set data to the factory shipment
status.
The user can select one of two modes in which to initialize the
data, namely, “Mode A” or “Mode B”.
<Items and data which are not initialized>
All plug-in menus
(In “Mode A”, these menus are initialized.)
The items of the System menu listed below:
Network1, Network2, Network3, Date, Time
1Press the s button to light its indicator and display the
System menu.
2Use [F1] to display the Initial sub menu.
3Use [F2] to select the initialization mode (“Mode A” or
“Mode B”).
4Press [F2] to proceed with the initializing.
Once initialization has been completed the power of the
unit shuts off and turns back on again automatically.
3-8-2. Initializing fader
The range for executing a transition can be initialized by
operating the fader lever.
Initialization should be performed when transitions are not
completed to the end even when the fader lever has been
moved as far as it will go.
1Press [F3] in the Initial sub menu to perform
initialization.
2When initializing, use [F3] to select “Yes” and press the
[F3].
When not initializing, use [F3] to select “No” and press
the [F3].