Filter
Top Products
58
1. Basic operations
w Setting the event switching effect (Path)
Switching from one event to another (bus switching) can be
accomplished smoothly.
1Press the e button to light its indicator, and display the
Event Memory menu.
2Use [F1] to display the Path sub menu.
3Use [F2] to set the effect to be used for switching
images using the Effect item.
Dissolve The images are switched using the dissolve
effect.
Cut The images are switched using the cut effect.
The dissolve effect duration is set in the Effect
Dissolve sub menu which is selected on the Time
menu.
4Use [F3] to set the PinP bus transition using the PinP
Bus item.
Dissolve The PinP bus images are switched using the
dissolve effect.
Cut The PinP bus images are switched using the
cut effect.
5Use [F4] to select the path to be used for switching the
images using the Trans Path item.
The following transitions are targeted.
Width of the borders
Soft effect of the borders
Colors of the borders
Positions of the images
Trimming values
Linear The switching from one image to another is
interpolated linearly.
Step The parameters are updated when the events
are passed through.
6Use [F5] to select the effect when the colors are
switched using the Hue Path item.
The following hues are targeted.
Colors of the color background
Colors of the borders
Colors of the edges
Colors of the fill matte
Short The colors are changed toward less hue on
the vectorscope.
Long The colors are changed toward more hue on
the vectorscope.
CW The Hue is changed clockwise on the
vectorscope.
CCW The Hue is changed counterclockwise on the
vectorscope.
Step The color changes are updated when an
event is passed through.