Filter
Top Products
82
2. Input/output signal settings
2-1-10. Setting the DVI input signals
Set the DVI input signals when the DVI input board (option) or full-HD DVI input board (option) has been connected.
Signals with the following resolutions can be input.
DVI input signals
Standard
(Digital)
DVI Input Board
(Digital/Analog)
Full-HD DVI Input Board
(Digital)
XGA
(1024 768)/60 Hz
WXGA
(1280 768)/60 Hz
SXGA
(1280 1024)/60 Hz
WSXGA+
(1680 1050)/60 Hz
—
UXGA
(1600 1200)/60 Hz
—
WUXGA
(1920 1200)/60 Hz
—
1080/59.94p
(1920 1080)/59.94 Hz
—
1080/50p
(1920 1080)/50 Hz
—
1080/59.94i
(1920 1080)/59.94 Hz
— —
1080/50i
(1920 1080)/50 Hz
— —
720/59.94p
(1280 720)/59.94 Hz
— —
720/50p
(1280 720)/50 Hz
— —
: Can be set.
—: Cannot be set.
p If signals with any other resolutions or frequencies are input, the signals cannot be imported correctly.
The images which are output at a time like this may be black or disturbed.
p These boards are incompatible with the HDCP (High-bandwidth Digital Content Protection).
1On the Input sub menu, use [F2] to select the input to
be set using the Select item.
Refer to “2-1. Input signal settings”.
2Use [F1] to display the DVI Input sub menu.
3Use [F2] to select the signal system using the Mode
item.
Set this when the DVI input board (AV-HS04M3) has
been connected.
Digital Digital input signals of the DVI connector are
effective.
Analog Analog input signals of the DVI connector are
effective.
4Use [F3] to select the scaling method.
Fit-V The aspect ratio of the input images is
maintained, and the size of the images is
increased or reduced in accordance with the
vertical resolution.
Fit-H The aspect ratio of the input images is
maintained, and the size of the images is
increased or reduced in accordance with the
horizontal resolution.
Full The size of the input images is increased
or reduced in accordance with the system
resolution.
(The aspect ratio of the input images is not
kept the same. The rate at which the image
size is increased or reduced in the vertical
direction and in the horizontal direction
differs.)
For details on the sizes that correspond to the formats,
refer to “DVI input scaling size table” (on page 83).