Filter
Top Products
76
2. Input/output signal settings
2-1-1. Setting the frame synchronizer
The frame synchronizer can be set to On or Off for each input.
The DVI input frame synchronizer is permanently On.
It cannot be set from On to Off or vice versa.
1On the Input sub menu, use [F2] to select the input to
be set using the Select item.
Refer to “2-1. Input signal settings”.
2Use [F1] to display the FS sub menu.
3Use [F2] to set On or Off for the frame synchronizer
using the FS item.
If the output signal phase is set to 0H, Off cannot be
selected as the FS item setting.
AVDL function is active while the frame synchronizer
function is set to Off.
The AVDL function automatically adjusts the input image
signal phase to the horizontal synchronization reference
signal phase.
For details, refer to “2-4. Adjusting the output signal phase”.