Filter
Top Products
64
1. Basic operations
1-11-4. Playing back moving images (Clip)
Establishing the playback mode
1Press the v button to light its indicator, and display the
Video Memory menu.
2Use [F1] to display the Clip1 Play Mode sub menu (or
Clip2 Play Mode sub menu).
3Use [F2] to select the playback mode using the Mode
item.
: This function can be actuated in any model whose
system version is V2.00.00 and up.
These operations cannot be performed in a model
with a system version of below V2.00.00.
Lead Operation returns to the start frame after
playback.
Last Operation stops at the end frame after
playback.
Loop The end frame and start frame are joined
together and played back repeatedly.
4Use [F3] to select reverse playback using the Reverse
item.
: This function can be actuated in any model whose
system version is V2.00.00 and up.
These operations cannot be performed in a model
with a system version of below V2.00.00.
On The moving images are played back in the
reverse direction.
Off The moving images are played back in the
forward direction.
When the [VMEM] button on the right of the number
key is pressed and the video memory operation mode
has been established, the operation of this button is
linked with the 3 button among the number keys.
5Use [F4] to select the speed for variable speed playback
using the Variable item.
Speeds which can be selected:
1/8, 1/4, 1/2, 1, 2, 4, 8
6Use [F5] to select the image when operation is stopped
using the Freeze item.
Frame A frame image is played back.
Field A field image is played back.
7Use [F1] to display the Trans Sync sub menu.
: This function can be actuated in any model whose
system version is V2.00.00 and up.
These operations cannot be performed in a model
with a system version of below V2.00.00.
8Use [F2] and [F3] to set the control button used for
playing back moving images in tandem with the
transition operation.
Use [F2] (Clip1 item) to set the Clip1 playback start
button, and use [F3] (Clip2 item) to set the Clip2
playback start button.
: This function can be actuated in any model whose
system version is V2.00.00 and up.
These operations cannot be performed in a model
with a system version of below V2.00.00.
Off Playback is not performed in tandem with the
transition operation.
KEY ON The playback of the moving images is started
in tandem with the operation of the [KEY ON]
button.
PinP1 ON The playback of the moving images is started
in tandem with the operation of the [PinP1
ON] button.
PinP2 ON The playback of the moving images is started
in tandem with the operation of the [PinP2
ON] button.
DSK ON The playback of the moving images is started
in tandem with the operation of the [DSK ON]
button.
FTB ON The playback of the moving images is started
in tandem with the operation of the [FTB ON]
button.
Playing back the moving images
1Press the v button to light its indicator, and display the
Video Memory menu.
2Use [F1] to display the Video Memory1 sub menu.
3Use [F2] to select Clip1 or Clip2 using the Select item.
4When [F4] (Play) is pressed, playback of the moving
images is started.
: This function can be actuated in any model whose
system version is V2.00.00 and up.
These operations cannot be performed in a model
with a system version of below V2.00.00.
When the [VMEM] button on the right of the number
key is pressed and the video memory operation mode
has been established, the operation of this button
is linked with the [TAKE/ENTER] button among the
number keys.
The current playback position (time) is displayed for
the Current Time item on the Video Memory3 sub
menu.