Filter
Top Products
133
Menu
Sub menu Parameter 1 Parameter 2 Parameter 3 Parameter 4
Use [F1] to select. Use [F2] to select. Use [F3] to select. Use [F4] to select. Use [F5] to select.
Output Output Parameter
Select ()
SDI Limit
Setting range SDI OUT1 to 5,
DVI OUT,
OUT-A1,
OUT-A2,
OUT-B1,
OUT-B2
Off, 108, 104,
100
Default value SDI OUT1 Off
Output (SDI) / Y
SDI OUT1 to SDI OUT5,
OUT A1, OUT A2,
OUT B1 or OUT B2 is
displayed in the Y part.
(OUT A1, OUT A2,
OUT B1 and OUT B2
take effect when the
AV-HS04M7 board has
been connected.)
Assign Parameter Source Mode
Setting range PGM, PVW,
CLN, AUX1 to 4,
MV, KeyOut,
MEM-PVW
Normal,
Down Convert
(“Down Convert”
takes effect when
AV-HS04M7 is
connected.)
Default value PGM(OUT1),
PVW(OUT2),
AUX1(OUT3),
AUX2(OUT4),
AUX3(OUT5),
AUX1(OUTA1),
AUX2(OUTA2),
AUX3(OUTB1),
AUX4(OUTB2)
Normal
Down
Converter
Parameter Scale Delay Sharp
(Enabled when
the AV-HS04M7
option board has
been connected.)
Setting range Squeeze,
Edge Crop,
Letter Box
90H(75H), 1F 1 to 5
Default value Squeeze 90H(75H) 3
Output (
Analog
) / Y
OUT A1, OUT A2,
OUT B1 or OUT B2 is
displayed in the Y part.
(OUT A1, OUT A2,
OUT B1 and OUT B2
take effect when the
AV-HS04M4 board has
been connected.
OUT A2 and OUT B2
take effect when the
AV-HS04M5 board has
been connected.)
Assign Parameter Source
Setting range PGM, PVW,
CLN, AUX1 to 4,
MV, Key Out,
MEM-PVW
Default value AUX1(OUTA1),
AUX2(OUTA2),
AUX3(OUTB1),
AUX4(OUTB2)
5. Setting menu table