Filter
Top Products
86
2. Input/output signal settings
2-1-11. Displaying the DVI input signal information
These are used to display the information concerning the DVI-D input signal images.
The information cannot be changed.
1On the Input sub menu, use [F2] to select the input to be set using the Select item.
Refer to “2-1. Input signal settings”.
2Use [F1] to display the DVI Status sub menu.
Size This indicates the pixel count of the images.
Dot Clock This indicates the dot clock frequency of the
images.
H-Frequency This indicates the horizontal frequency of the
images.
V-Frequency This indicates the vertical frequency of the
images.
The formats supported are listed below.
<DVI-D formats supported>
Input video signal
Dot clock frequency
(MHz)
Frequency
Horizontal
(kHz)
Vertical
(Hz)
XGA
1024 768
Digital 65.0 48.36 60.00
WXGA
1280 768
Digital 79.5 47.78 59.87
SXGA
1280 1024
Digital 108.0 63.98 60.02
WSXGA+
1680 1050
Digital 146.2 65.29 59.95
UXGA
1600 1200
Digital 162.0 75.00 60.00
WUXGA
1920 1200
Digital 154.0 74.04 59.95
1080/50p
1920 1080
Digital (RGB) 148.5 56.25 50.00
1080/59.94p
1920 1080
Digital (RGB) 148.5/1.001 67.50/1.001 60.00/1.001
1080/50i
1920 1080
Digital (RGB) 74.25 28.13 50.00
1080/59.94i
1920 1080
Digital (RGB) 74.25/1.001 33.72 60.00/1.001
720/50p
1280 720
Digital (RGB) 74.25 37.50 50.00
720/59.94p
1280 720
Digital (RGB) 74.25/1.001 44.96 60.00/1.001
p If the format of the input signals is not supported, it may not be possible to import the signals properly, and a black image or
disturbed image may appear.