Filter
Top Products
48
1. Basic operations
1-10-3. Recalling the operations stored in
the memory (Recall)
4
INS
MENU
INPUT
VMEM
BKGD
PATT
KEY
PATT
TAKE
ENTER
�/
+
PAGE
PLAY
REC
STOP
XPT
DSBL
＜
CLIP 1
STILL 1
MEMORY / WIPE PATTERN / 10 KEY
＜＜
TRIM OFF
＞＞
CLIP 2
STILL 2
REV
TRIM OUT
TRIM IN
9
PASTE
6
MOD
3
REV
C
UNDO
8
COPY
5
DEL
2
＞
.
＞＞
7
NEW
1
＜
0/10
＜＜
STORE
RE
CALL
EDIT
DEL
SHOT
MEM
EVENT
MEM
PLUGIN
MEM1
PLUGIN
MEM2
＞
1Press the [SHOT MEM] or [EVENT MEM] button of the
memory whose operations are to be recalled.
Depending on the operation that was performed last,
the [STORE] button, [RECALL] button, [DEL] button or
[EDIT] button lights.
2Select the bus (BKGD, KEY, PinP1 or PinP2) to be
recalled from the memory.
From the Shot Memory menu (or Event Memory menu),
select the Recall Select sub menu, and then select “On”.
Refer to “1-10-6. Selecting the buses whose settings
are to be registered and or played back”.
3When selecting materials using the crosspoint
buttons on the operation panel instead of using the
registered “Material selection” item materials, press the
[XPT DSBL] button to light its indicator in red.
Refer to “1-10-1. Memory registration and recall
items”.
4Press the [RECALL] button.
The [RECALL] button indicator lights up, and the
number key in which the memory is registered lights in
green.
The operations of other memory buttons —
[EVENT MEM] (or [SHOT MEM]), [PLUGIN MEM1] and
[PLUGIN MEM2] — no longer take effect.
5Press the P button, and press the number key (1 to
10) corresponding to the page number.
6Press the number key (1 to 10) corresponding to the
number for the memory whose operations are to be
recalled.
In the case of a shot memory, the video effects are
recalled, and playback starts.
During playback, the number key corresponding to the
memory number blinks in green.
In the case of an event memory, the events are
recalled, and playback starts.
During playback, the number key corresponding to the
memory number blinks in green.
If there is a PAUSE event, playback pauses at that
event, and the number key corresponding to the
memory number blinks in amber.
Each time the number key corresponding to the
memory number is pressed, playback or pause is
selected alternately, and this selection is repeated.
7When playback of the effects or events in the recalled
memory number starts, the C button is enabled, and
its indicator lights up. If this button is pressed during
playback, playback is terminated.