Filter
Top Products
65
1. Basic operations
Moving to the first frame or last frame
1Press the v button to light its indicator, and display the
Video Memory menu.
2Use [F1] to display the Video Memory2 sub menu.
3When [F2] (LEAD) is pressed, the current position is
moved to the first (head) frame; conversely, when [F3]
(LAST) is pressed, the current position is moved to the
last frame.
When the [VMEM] button located on the right of
the number keys is pressed and the video memory
operation mode has been established, the operation
of number keys 0 and . become linked.
: This function can be actuated in any model whose
system version is V2.00.00 and up.
These operations cannot be performed using the
number keys with models whose system version is
below V2.00.00.
Trimming moving images
The position where the playback of the moving images is to
start (IN point) and the position when it is to end (OUT point)
can be set.
1Press the [VMEM] button on the right of the number
keys to establish the video memory operation mode.
2Use the number keys to stop the moving images at the
position where the images are to be trimmed (IN point
or OUT point).
3Trim the moving images by operating the buttons below.
9
Sets the trimming IN point.
6
Sets the trimming OUT point.
C
Releases the trimming settings.
The trimmed moving images are played back from the IN
point to the OUT point, however you can move anywhere
in the section from the start point to the end point of the
recorded moving images by operating 1, 2, 0 and
..
Trimming can be set and released over and over again
until the moving images are stored on the memory card.
When the moving images are saved on an memory card,
only the trimmed parts are saved and the parts no longer
required are deleted.
w Operations performed using the number keys
: This function can be actuated in any model whose
system version is V2.00.00 and up.
These operations cannot be performed using the
number keys with models whose system version is below
V2.00.00.
4
INS
MENU
INPUT
VMEM
BKGD
PATT
KEY
PATT
TAKE
ENTER
�/
+
PAGE
PLAY
REC
STOP
XPT
DSBL
＜
CLIP 1
STILL 1
MEMORY / WIPE PATTERN / 10 KEY
＜＜
TRIM OFF
＞＞
CLIP 2
STILL 2
REV
TRIM OUT
TRIM IN
9
PASTE
6
MOD
3
REV
C
UNDO
8
COPY
5
DEL
2
＞
.
＞＞
7
NEW
1
＜
0/10
＜＜
＞
7
Selects Still1 as the operation target.
8
Selects Still2 as the operation target.
4
Selects Clip1 as the operation target.
5
Selects Clip2 as the operation target.
9
Sets the trimming IN point.
6
Sets the trimming OUT point.
C
Releases the trimming settings.
1
Plays back the moving images one frame at a time in
the reverse direction.
2
Plays back the moving images one frame at a time in
the forward direction.
3
Sets the playback direction to reverse.
(Button indicator lights: reverse direction; indicator off:
forward direction)
0
Transfers to the start frame of the moving images, and
stops.
.
Transfers to the end frame of the moving images, and
stops.
T
Plays back the moving images.
X
Starts recording the moving images.
P
Stops the recording or playback of the moving images.