Filter
Top Products
12
Panel Descriptions
Rear Panel
12
13
14 15 16 17 18 19 20 21
12. [POWER ON] Switch
This switch turns the power on/o (p. 17).
13. AC IN Connector
Connect the included power cord to this connector (p. 14).
14. USB MEMORY Connector
Connect separately sold USB memory or a CD-ROM drive here (p. 18).
Use USB memory or a CD-ROM drive made by Roland.
15. USB MIDI Connector
You can connect this to your computer so that it can exchange
performance data with the RD-700NX (p. 89).
16. [DISPLAY CONTRAST] Knob
Adjusts the display’s contrast (p. 18).
17. PEDAL Jacks (DAMPER, FC1, FC2)
Connecting the pedal switch provided with the RD-700NX to the
DAMPER jack allows you to use the switch as a damper pedal.
With a pedal connected to the FC1 or FC2 jack, you can then assign a
variety of functions to the pedal (p. 72).
18. MIDI Connectors (IN, OUT 1, OUT 2, THRU/OUT 3)
Used for connecting external MIDI devices and for transmission of MIDI
messages (p. 86).
The THRU/OUT 3 connector’s function can be switched to operate
either as MIDI THRU or as MIDI OUT (p. 69).
19. OUTPUT L (MONO)/R Jacks
Provide output of the audio signals. These are connected to an amp or
other device. For monaural output use the L/MONO jack (p. 15).
20. BALANCED OUT L/R Jacks
Connectors for balanced output of the audio signals. Connect to
mixers and other such gear (p. 15).
21. PHONES Jack
A set of headphones can be connected to this jack (p. 15).
Even when headphones are connected, sound will still be output from
the OUTPUT jacks and BALANCED OUT jacks.