Filter
Top Products
59
Using the RD-700NX As a Master Keyboard
Adjusting the Volume of Each Layer
Layer
Switch
Layer
LEVEL
Slider
Layer
Layer
Layer
Layer
[MIDI]
Button
When the [MIDI] button is lit, you can use the Layer switch and Layer LEVEL sliders to control the EXTERNAL Layer in the same way as with the Layer (p.
21).
Layer Switch
This speci es whether MIDI data including the notes you play on the keyboard in the EXTERNAL layer will be transmitted from the MIDI OUT connector
if the [MIDI] button is lit.
When the Layer switch indicator for a Layer is lit (on), MIDI messages are transmitted from MIDI OUT connector when the keys for that Layer are played.
When the Layer switch indicator for a Layer is not lighted (o ), MIDI messages are not transmitted from MIDI OUT connector even when the keys for
that part are played.
Layer switch will turn on or o each time you press it.
Layer LEVEL Slider
If the [MIDI] button is lit, these sliders adjust the volume of the EXTERNAL layers.
Selecting the MIDI Connector to Use for Output
The RD-700NX provides two MIDI OUT connectors, a MIDI connector whose function can be switched between OUT and THRU, and a USB MIDI
connector.
For each layer you can select the MIDI OUT connector or USB MIDI connector from which its data is to be transmitted.
1
2
1. Press the [MIDI] button so the “MIDI” indicator is lit.
The MIDI screen appears.
If the following screen doesn’t appear, press the Cursor [
] button several times to display the MIDI screen.
NOTE
When Rec Mode is set to ON in the Utility Rec Setting in Edit mode, the MIDI screen as shown above is
not displayed. Set Rec Mode to OFF when setting the MIDI Transmit channel (p. 86).
2. Use the Cursor [ ] [ ] [ ] [ ] buttons to move the cursor, and use the [DEC] [INC]
buttons or the VALUE dial to specify the connector from which each layer will transmit its
MIDI data.
Layer Parameter Settings Description
UP 1 (UPPER 1)
OUT
(MIDI OUT Port)
ALL,
1 (MIDI OUT1),
2 (MIDI OUT2),
3 (MIDI OUT3),
USB
The RD-700NX’s performance data is transmitted
from the selected connector.
UP 2 (UPPER 2)
LW 1 (LOWER 1)
LW 2 (LOWER 2)
NOTE
If the System Edit parameter MIDI OUT3 Port Setting (p. 69) is set to “THRU,” the performance data from the RD-700NX will not be transmitted from the
MIDI OUT 3 connector; instead, the performance data received at the MIDI IN connector will be retransmitted without change (MIDI THRU).