Filter
Top Products
52
Making Detailed Settings for the ONE TOUCH Tones
Selecting an Eect
You can apply a multi-eect you’ve selected from 84 dierent eect
types. For details on the available eect types, refer to the Eect List
(p. 96).
Selecting the Type of Amp
This switches the amp of the E. Piano. By changing the combination of
E. piano type and amp type, you can create a variety of sounds ranging
from standard E. piano sounds to new sounds that have not been
heard before.
THRU
No amp will be used.
OLD CASE
This combines TINE EP with a variation of it, reproducing a typical E.
piano sound of the early ‘70s.
Parameter Value Description
Treble -50–+50
Amount of boost/cut for the
high-frequency range
Bass -50–+50
Amount of boost/cut for the
low-frequency range
Tremolo Sw OFF, ON Turns tremolo on/o.
Tremolo Rate
Mode
Hz, Note (*1)
When this is set to “note,” the eect is
synchronized with the tempo.
Tremolo Rate
(Hz)
0.05–10.00 Hz Frequency of the tremolo (Hz)
Tremolo Rate
(
)
Note (*1)
Frequency of the tremolo (
)
Tremolo Depth 0–127 Depth of the tremolo
Tremolo Duty -10–+10
Species the duty cycle of the LFO
waveform used to apply tremolo.
Increasing this value will increase the
duty cycle of the LFO waveform for
the L-channel; the duty cycle for the
R-channel will decrease.
Speaker Sim
LINE, OLD, NEW,
WURLY, TWIN
Type of the speaker
* When “LINE” is selected, no
speaker used.
Drive 0–48 Amount of distortion.
Level 0–127 Adjust the output level.
NEW CASE
This combines TINE EP with a variation of it, reproducing a typical E.
piano sound of the late ‘70s through ‘80s.
Parameter Value Description
Treble -50–+50
Amount of boost/cut for the
high-frequency range
Bass -50–+50
Amount of boost/cut for the
low-frequency range
Tremolo Sw OFF, ON Turns tremolo on/o.
Tremolo Rate
Mode
Hz, Note (*1)
When this is set to “note,” the eect is
synchronized with the tempo.
Tremolo Rate
(Hz)
0.05–10.00 Hz Frequency of the tremolo (Hz)
Tremolo Rate
(
)
Note (*1)
Frequency of the tremolo (
)
Tremolo Depth 0–127 Depth of the tremolo
Tremolo Duty -10–+10
Species the duty cycle of the LFO
waveform used to apply tremolo.
Increasing this value will increase the
duty cycle of the LFO waveform for
the L-channel; the duty cycle for the
R-channel will decrease.
Speaker Sim
LINE, OLD, NEW,
WURLY, TWIN
Type of the speaker
* When “LINE” is selected, no
speaker used.
Drive 0–48 Amount of distortion.
Level 0–127 Adjust the output level.
DYNO
This amp type is a modication of OLD CASE or NEW CASE, and is
marked by a bright sound and distinctive distortion that occurs when
you play strongly. When used in conjunction with TINE EP or a variation
of it, this will reproduce the E. piano sounds used in numerous
recordings of the early ‘80s.
Parameter Value Description
Filter Curve 0–127
Amount of boost/cut for the
middle-frequency range
Bass Boost 0–127
Amount of boost/cut for the
low-frequency range
Overtone 0–127
Amount of boost/cut for the
high-frequency range
Tremolo Sw OFF, ON Turns tremolo on/o.
Tremolo Rate
Mode
Hz, Note (*1)
When this is set to “note,” the eect is
synchronized with the tempo.
Tremolo Rate
(Hz)
0.05–10.00 Hz Frequency of the tremolo (Hz)
Tremolo Rate
(
)
Note (*1)
Frequency of the tremolo (
)
Tremolo Depth 0–127 Depth of the tremolo
Tremolo Shape 0–127
Adjusts the tremolo waveform.
Values near 0 will approach a triangle
wave, and values near 127 will
approach a pulse wave.
The eect will also change depend-
ing on the Tremolo Depth setting.
Limiter OFF, ON
Selects whether the limiter will be
applied (on) or not (o).
Speaker Sim
LINE, OLD, NEW,
WURLY, TWIN
Type of the speaker
* When “LINE” is selected, no
speaker used.
Drive 0–48 Amount of distortion.
Level 0–127 Adjust the output level.