Filter
Top Products
64
Using the RD-700NX As a Master Keyboard
Setting the Range for the Change in Pitch
with the Pitch Bend Lever (Bend Range)
This sets the amount of pitch change that will occur when you move
the Pitch Bend lever (4 octaves).
Parameter RPN Value
B.R
(Bend Range)
00H/00H
- - - (OFF),
0–48 (semitone)
Setting the Amount of Modulation Applied
(Modulation Depth)
This sets the depth of the eect when the Modulation lever is tilted.
Parameter RPN Value
M.D
(Modulation Depth)
00H/05H
- - - (OFF),
0–127
Turning Each Controller On and O
These settings determine whether the external MIDI device is
controlled (ON), or not (OFF) by the pedals connected to each PEDAL
jack, the slider, the Modulation lever, the Pitch Bend lever, and [S1] [S2]
buttons.
Parameter Description Value
Dp Damper pedal
ON, OFF
F1 Pedal connected to the FC1 jack
F2 Pedal connected to the FC2 jack
PB Pitch Bend Lever
Md Modulation Lever
S1 [S1] button
S2 [S2] button
LW2 CONTROL Slider (LW2)
LW1 CONTROL Slider (LW1)
UP2 CONTROL Slider (UP2)
UP1 CONTROL Slider (UP1)
Transmitting the Control Change (USER CC)
You can assign and transmit two dierent control change messages.
Parameter Value
CC1 (User CC1 Number)
- - - (OFF), 0–127
Value (User CC1 Value)
CC2 (User CC2 Number)
Value (User CC2 Value)