Filter
Top Products
46
Making Detailed Settings for the Piano Tones
You can make detailed settings to adjust the piano sound that’s used when you press the ONE TOUCH PIANO button (p. 26).
These detailed settings can be saved for each variation.
NOTE
When you press one of the ONE TOUCH PIANO buttons, all settings other than the tone settings will be set to their power-up default values.
Store any arrangements of settings that you want to keep in Live Set (p. 45).
1. In the ONE TOUCH PIANO screen, use [DEC] [INC] or the VALUE dial to select the variation that you want to edit.
2. Press the [TONE EDIT] button.
The tone edit screen will appear.
3. Press the Cursor [ ] [ ] buttons to switch screens, and press the Cursor [ ] [ ] buttons to move the cursor to the parameter
to be set.
Move the cursor to one of the following menus and press the [ENTER] button, then select the parameter you want to set in the screen that follows.
1. Key Touch Edit
2. Micro Tune Edit
3. Sym. Resonance
4. Equalizer
5. Initialize
4. Use the [DEC] [INC] buttons or the VALUE dial to edit the value.
For details on the parameters, refer to the Piano Parameters table.
5. If you want to save the setting, press the [LAYER EDIT] (WRITE) button.
The conrmation message appears.
Press the [ENTER] button to save the settings. If you want to cancel, press the [EXIT/SHIFT] button, you are returned to the MENU screen.
6. When you nish making settings, press the [EXIT/SHIFT] button.
You are returned to the ONE TOUCH PIANO screen.
NOTE
Depending on the piano tone selected, this setting may not be available.
Making Detailed Settings for the ONE TOUCH Tones