Filter
Top Products
22
Inserting and Removing a Memory Card
1.
Insert the memory card into the card slot located on the front panel.
You can insert a memory card whether the SP-606 is turned on or off.
Carefully insert the Memory card all the way in-until it is firmly in place.
When using a memory card for the first time, you must format it on the SP-606. (p. 67)
Memory cards formatted by another device will not be recognized by the SP-606.
If the SP-606 is powered up, you must shut it down before removing the memory card. If you
remove the card without shutting down, you risk damaging the internal memory or the contents of
the memory card.
1.
Go to the Play screen (p. 15).
2.
Hold down [FUNC] and press [EXIT] (SHUTDOWN) to get the SHUTDOWN screen.
3.
Press [F3] to shut down.
When you have returned to the Play screen, it is safe to remove the memory card.
If you decide not to shut down, press [F2] (CANCEL).
After shutdown, a memory card will not be detected even if it is present in the card slot. It will be
detected when you remove the memory card from the slot and re-insert it.
4.
Press the eject button located beside the front panel card slot. A portion of the card will protrude, allowing
you to grasp the card and pull it out.
Inserting a Memory Card
Removing a Memory Card after Shutdown
SP-606_e.book 22 ページ ２００４年６月２１日 月曜日 午前１０時８分