Filter
Top Products
82
Chapter 12. System Settings
If you hold down [FUNC] and press [F1] (INFO) in steps 3–7 of “Making System settings,” the
SYSTEM INFO
(System Information) screen will appear.
• You can press [F1] (MEMORY) to see the following items of memory-related information.
• Press [F2] (VER) to check the system program version.
This setting simultaneously adjusts the
OUTPUT L/R
(analog) and
DIGITAL OUT
(digital) volume.
If a USB connection is being used, this also adjusts the USB audio volume.
1.
Go to the Play screen (p. 15).
2.
Press [MENU] to get the Top Menu screen.
3.
Press [ ] to move the cursor to the “6:Master Level” line, and
press [ENTER].
The
MASTER LEVEL
screen will appear.
4.
Turn the VALUE dial or use [DEC][INC] to adjust the “Master Level”
value (0–127).
The OUTPUT L/R volume can also be adjusted by the top
panel VOLUME knob; however, the VOLUME knob does not affect the DIGITAL OUT or USB
audio volume.
5.
Press [EXIT] to return to the Play screen.
This setting is not remembered when you turn off the power.
Checking System Information
Item Explanation
Internal Internal memory: remaining available capacity (MB) / total capacity (16.0 MB)
Card Card memory: remaining available capacity (MB) / total capacity (MB)
*
If a memory card is not inserted, the display will indicate “No Card.”
Pattern Number of notes that can be saved in patterns
Song Number of songs that can be saved
Adjusting the Master Level
SP-606_e.book 82 ページ ２００４年６月２１日 月曜日 午前１０時８分