Filter
Top Products
90
Message Lists/
Recommended Memory Cards
Memory (Card)
Roland Corporation accepts no responsibility for the recovery of data lost from internal memory or memory card,
nor any damages resulting from such loss.
Message Lists
Message Explanation Action
SYSTEM DAMAGED A serious problem has occurred in the memory
because the power was not turned off correctly.
The memory has been initialized in order to re-
cover the contents; please turn the power off and
then on again.
You must use the correct procedure to turn off
the power. (p. 21)
MEMORY INITIALIZE
Memory was lost because the power was not
turned off correctly. The memory is being initial-
ized.
MEMORY RESTORE Part of the memory was damaged because the
power was not turned off correctly. The memory
contents are being recovered.
Memory Full! The operation cannot be executed because there
is not enough remaining memory.
Delete unneeded data (samples, patterns, songs).
(p. 32, p. 62, p. 65)
Memory Damaged! The contents of internal memory were damaged. Execute the System Initialize operation (p. 80). If
this does not resolve the problem, contact your
dealer or a Roland service center.
Not Supported Format!
You inserted a card of a capacity that the SP-606
cannot use.
The SP-606 can use CompactFlash cards with a
capacity of from 16 MB through 512 MB (3.3V).
Check the card you are using.
You are attempting to import an audio file that
the SP-606 cannot import.
Check the points of caution regarding the import
of audio files (p. 68).
Unformatted! You inserted a memory card of a format that the
SP-606 cannot use.
Format the memory card. (p. 67)
Card Damaged! The contents of the memory card were damaged.
Card Ejected! You removed the card without performing the
Shutdown procedure. The contents of internal
memory or the memory card may have been
damaged.
—
SP-606_e.book 90 ページ ２００４年６月２１日 月曜日 午前１０時８分