Filter
Top Products
24
Quick Start
1.
Go to the Pattern Play screen (p. 15).
The upper line of the screen shows the BPM (tempo) and number of
measures in the pattern.
The lower line of the screen shows the number of the currently selected
pad bank.
2.
Turn the VALUE dial or use [DEC][INC] to select a pattern.
When the SP-606 is shipped from the factory, patterns 1–40
contain preloaded pattern data.
3.
Press [ ] (Play) to begin playback.
If you turn the VALUE dial or use [DEC][INC] to select another pattern while a pattern is playing, the name of
that pattern will appear in the lower line, and will be reserved as the next-played pattern. When the currently
playing pattern has played to the end, the reserved pattern will automatically begin playing.
If the pattern number indication shown in the lower line is not highlighted, the SP-606 is already
preparing to switch to the next pattern, so you will not be able to reserve the next pattern.
You can press [ ][ ] while a pattern is playing to force the currently playing pattern to switch.
4.
Press [ ] (Stop) to stop playback.
If you press [ ] (Stop) once again or press [ ] (Top), you will return to the beginning of the pattern.
Pressing [ ] (Backward) moves you one measure back, while pressing [ ] (Forward) moves you one
measure forward.
1.
Go to the Pattern Play screen (p. 15).
2.
Press [F1] (LIST) to get the PATTERN LIST screen.
If the preloaded patterns are protected (p. 58), a lock symbol
is shown at the left of the corresponding pattern in the
screen.
3.
Turn the VALUE dial or use [DEC][INC] to select a pattern, and press [F3] (SELECT) or [ENTER] to confirm
your choice.
Patterns 1–16 can be selected directly by pressing pads [1]–[16].
If you decide you don’t want to select a pattern, you can press [EXIT] to cancel this procedure.
4.
Press [ ] (Play) to start playback.
5.
Press [ ] (Stop) to stop playback.
Playing Patterns
Basic Procedure for Playing a Pattern
Selecting and Playing a Pattern from the Pattern List
SP-606_e.book 24 ページ ２００４年６月２１日 月曜日 午前１０時８分