Filter
Top Products
38
Chapter 2. Using Effects
24 PHASER DEPTH RATE RESO
Adds modulation to the sound. Adjusts the depth of modula-
tion.
Adjusts the speed of modula-
tion.
Adjusts the character of modu-
lation.
25 STEP PHASER RATE STEP RATE RESO
Varies the pitch of the phaser
sound in stepwise fashion.
Adjusts the rate of modulation. Adjusts the rate of pitch change
(
*2
).
Adjusts the character of modu-
lation.
26 RING MODULATOR
FREQ E.LEVEL D.LEVEL
Gives the sound a metallic
character.
Adjusts the pitch of the metal-
lic sound.
Adjusts the volume of the ef-
fect sound.
Adjusts the volume of the di-
rect sound.
27 STEREOIZER SHIFT BALANCE LEVEL
Creates a pseudo-stereo effect
by delaying either the left or
right side of the sound. Particu-
larly effective when applied to
a monaural sound.
Adjusts the amount of delay
between left and right. Nega-
tive
(-) settings delay the left, and
positive (+) settings delay the
right side. At the center posi-
tion, there is no delay.
Adjusts the volume balance be-
tween the direct sound (D) and
effect sound (E).
Adjusts the output volume.
28 SPACE-D DEPTH RATE BALANCE
A multi-stage chorus that ap-
plies two phases of modulation
in stereo. This does not create a
sense of movement, but rather
a clear and transparent chorus
effect.
Adjusts the depth of modula-
tion.
Adjusts the rate of modulation. Adjusts the volume balance be-
tween the direct sound (D) and
the effect sound (E).
29 LOW BOOST BST FREQ BST GAIN LEVEL
Boosts the volume of the low-
frequency range to create a
deeper sound.
Adjusts the frequency (50–125
Hz) at which the low-frequen-
cy range will be boosted.
Adjusts the amount of boost
applied to the low-frequency
range.
Adjusts the output volume.
30 EQUALIZER LOW MIDDLE HIGH
Adjusts the volume of each fre-
quency range.
Adjusts the volume of the low-
frequency range.
Adjusts the volume of the mid-
frequency range.
Adjusts the volume of the high-
frequency range.
31 RADIO TUNING TUNING NOISE LV FREQ RNG
Simulates the sound heard
from a radio.
Adjusts the amount of tuning
inaccuracy.
Adjusts the volume of the
noise.
Adjusts the tonal character.
32 VINYL SIMULATOR
COMP NOISE LV WOW/F
Simulates the sound of a vinyl
record.
Adjusts the sense of compres-
sion typical of an analog
record.
Adjusts the volume of the noise
typical of an analog record.
Adjusts the rotational instabili-
ty typical of an analog record.
33 GATE
THRESHOLD MODE RELEASE
Uses the volume of the input
source coming into the effect to
cut the release portion of the re-
verberant sound. Use this
when you want to forcibly
shorten the decay of a sound.
Adjusts the volume level at
which the gate begins to close.
Selects the type of gate.
GATE:
When the volume of the
input source falls, the gate will
close, cutting the input source.
DUCK:
When the volume of the
input source rises, the gate will
close, cutting the input source.
Adjusts the time from when
the gate begins to close after
the hold time has elapsed until
it finishes closing.
34 NOISE GENERATOR
COLOR QUALITY LEVEL
Produces noise. Adjusts the color (tonal charac-
ter) of the “rushing” or “hiss-
ing” noise.
Adjusts how often scratch
noise (as produced by scratch-
es on a record) will appear.
Adjusts the volume of the
“rushing” or “hissing” noise.
35 ENHANCER SENS MIX LEVEL
Controls the overtone structure
of the high-frequency range to
add sparkle to the sound and
improve the definition.
Adjusts the depth of the en-
hancer effect.
Adjusts the volume of the gen-
erated overtones.
Adjusts the output volume.
MFX CTRL 1 CTRL 2 CTRL 3
SP-606_e.book 38 ページ ２００４年６月２１日 月曜日 午前１０時８分