Filter
Top Products
67
Chapter 8. Using a Memory Card
If the SP-606 is powered up, do not remove the memory card from the SP-606’s card slot before
shutting down (p. 22). Doing so may damage the SP-606 or the data in the memory card.
Make sure that the memory card is oriented correctly, and insert it all the way into the slot. Do not
use excessive force.
When using a memory card for the first time, you must format it on the SP-606. Memory cards
formatted by another device will not be recognized by the SP-606.
For more about inserting and removing memory cards, refer to “Inserting/Removing Memory
Cards” (p. 22).
For details on the recommended memory cards, refer to “Recommended Memory Cards” (p. 91) in
the Appendix.
Formatting a memory card will erase all data from that card.
1.
Insert the memory card into the front panel card slot.
2.
Go to the Play screen (p. 15).
3.
Hold down [FUNC] and press pad [10] (CARD UTIL) to get the CARD
UTILITY screen.
4.
Use [ ] to move the cursor to the “Card Format” line.
5.
Press [ENTER] to get the CARD FORMAT screen.
If a memory card is not inserted, the display will indicate
“Card Not Ready!”
6.
Press [F3] (EXEC). The display will indicate “All the data on the card
will be lost, are you sure?”
7.
Press [F3] (EXEC) to begin formatting.
If you decide to cancel, press [F2] (CANCEL).
While formatting is being carried out, the display will indicate “Executing ...”
8.
When the display indicates “Complete,” press [F3] (EXIT) or [EXIT] to return to the Play screen.
Do not modify or delete the files or folders that are created when a memory card is formatted. If you
do so, the SP-606 will not recognize the card correctly.
1.
Insert the memory card into the front panel card slot.
2.
Go to the Play screen (p. 15).
3.
Hold down [FUNC] and press pad [10] (CARD UTIL) to get the CARD UTILITY screen.
Formatting (Initializing) a Memory Card
Basic Procedure for Card Utility Operations
SP-606_e.book 67 ページ ２００４年６月２１日 月曜日 午前１０時８分