Filter
Top Products
92
MIDI Implementation
Model: SP-606
Date: Mar. 30, 2004
Version: 1.00
1. Receive data
■
Channel Voice Messages
* For the correspondence between note numbers and pad banks, refer to “MIDI
on the SP-606” (p. 78).
●
Note Off
Status
2nd byte 3rd byte
8nH kkH vvH
9nH kkH 00H
n = MIDI channel number: 0H - FH (ch.1 - ch.16)
kk = note number: 23H - 62H (35 - 98)
vv = note off velocity: 00H - 7FH (0 - 127)
●
Note On
Status
2nd byte 3rd byte
9nH kkH vvH
n = MIDI channel number: 0H - FH (ch.1 - ch.16)
kk = note number: 23H - 62H (35 - 98)
vv = note on velocity: 01H - 7FH (1 - 127)
●
Control Change
❍
MFX1 Type (Controller number 12)
Status
2nd byte 3rd byte
BnH 0CH vvH
n = MIDI channel number: 0H - FH (ch.1 - ch.16)
vv = Control value: 00H - 7FH (0 - 127)
❍
MFX1 CTRL1 (Controller number 13)
Status
2nd byte 3rd byte
BnH 0DH vvH
n = MIDI channel number: 0H - FH (ch.1 - ch.16)
vv = Control value: 00H - 7FH (0 - 127)
❍
MFX1 CTRL2 (Controller number 14)
Status
2nd byte 3rd byte
BnH 0EH vvH
n = MIDI channel number: 0H - FH (ch.1 - ch.16)
vv = Control value: 00H - 7FH (0 - 127)
❍
MFX1 CTRL3 (Controller number 15)
Status
2nd byte 3rd byte
BnH 0FH vvH
n = MIDI channel number: 0H - FH (ch.1 - ch.16)
vv = Control value: 00H - 7FH (0 - 127)
❍
MFX2 Type (Controller number 20)
Status
2nd byte 3rd byte
BnH 14H vvH
n = MIDI channel number: 0H - FH (ch.1 - ch.16)
vv = Control value: 00H - 7FH (0 - 127)
❍
MFX2 CTRL1 (Controller number 21)
Status
2nd byte 3rd byte
BnH 15H vvH
n = MIDI channel number: 0H - FH (ch.1 - ch.16)
vv = Control value: 00H - 7FH (0 - 127)
❍
MFX2 CTRL2 (Controller number 22)
Status
2nd byte 3rd byte
BnH 16H vvH
n = MIDI channel number: 0H - FH (ch.1 - ch.16)
vv = Control value: 00H - 7FH (0 - 127)
❍
MFX2 CTRL3 (Controller number 23)
Status
2nd byte 3rd byte
BnH 17H vvH
n = MIDI channel number: 0H - FH (ch.1 - ch.16)
vv = Control value: 00H - 7FH (0 - 127)
❍
MFX1 Switch (Controller number 24)
Status
2nd byte 3rd byte
BnH 18H vvH
n = MIDI channel number: 0H - FH (ch.1 - ch.16)
vv = Control value: 00H - 7FH (0 - 127) (0 - 63 = OFF, 64 - 127 = ON)
❍
MFX2 Switch (Controller number 25)
Status
2nd byte 3rd byte
BnH 19H vvH
n = MIDI channel number: 0H - FH (ch.1 - ch.16)
vv = Control value: 00H - 7FH (0 - 127) (0 - 63 = OFF, 64 - 127 = ON)
■
Channel Mode Messages
* If the following channel mode message is received during realtime recording,
note-off messages will be generated for all notes on the corresponding channel
that are currently on, and those note-off messages will be recorded.
●
All Sounds Off (Controller number 120)
Status
2nd byte 3rd byte
BnH 78H 00H
n = MIDI channel number: 0H - FH (ch.1 - ch.16)
* If the All Sound Off message is received, all notes will be silenced regardless of
their channel.
●
All Notes Off (Controller number 123)
Status
2nd byte 3rd byte
BnH 7BH 00H
n = MIDI channel number: 0H - FH (ch.1 - ch.16)
* When All Notes Off is received, all samples whose Trig Mode is GATE and that
are in a note-on state will be silenced, regardless of their channel.
SP-606_e.book 92 ページ ２００４年６月２１日 月曜日 午前１０時８分