Roland VR-760 Musical Instrument User Manual


 
90
Messages and Error Messages
This section lists the messages (error messages) that the VR-760 produces and explains the meaning of each message, giving you
to appropriate action to take.
Message Meaning Action
BULK: Check Sum Error The checksum value of a system exclusive
message was incorrect.
Correct the checksum value.
Sending... Transmission of bulk data is in progress.
BULK: Receive Data Error The bulk data could not be received correctly. If after repeated attempts this message still
appears, the problem may lie with the MIDI
data.
Canceled Processing has been cancelled.
Completed !! Processing is completed.
Damaged Card !! Formatting of the memory card failed. The
memory card may be corrupted.
Reformat the memory card. If this does not
resolve the issue, use a different memory
card.
Executing....
Keep On Power!
The VR-760 is restoring the factory settings. Do
not turn the power off.
Format Card
Formatting...
Formatting of the memory card is in progress.
Illegal File Name! A file name has not been assigned. Assign a file name.
Memory Card Error! There is a problem with the memory card. Use a different memory card.
Memory Card is Full! Saving is not possible because there is
insufficient space in the memory card.
Delete unneeded data.
Memory Card is Unusual! The memory card may be corrupted. Use a different memory card.
MIDI Buffer Full !! Due to an inordinate volume of MIDI
messages received, the VR-760 has failed to
process them properly.
Reduce the amount of MIDI messages to be
transmitted.
MIDI Communication Error! It is possible that the power has been turned
off for the MIDI device connected to the VR-
760’s MIDI IN connector.
Check the power of the connected MIDI
device.
It is possible that a MIDI cable has been pulled
out or has a short.
Check the MIDI cable.
No Card !! A memory card is not inserted in the slot. Insert a memory card into the slot.
No File !! There are no files.
Now, Writing. ..
Keep On Power!
The VR-760 is writing data into memory. Do
not turn the power off.
The Card Pulled Out! The memory card is pulled out. Insert the disk, and try the operation once
again.
Unknown File !! This file cannot be handled by the VR-760.
Unknown Format!! This memory card has not been formatted for
the VR-760.
Please format the memory card for the VR-
760.
Unsupported Memory Card! This memory card is not compatible. Use a memory card compatible with the VR-
760.
User Memory Damaged! The User memory is corrupted; carry out
Factory Reset.
If the problem remains even after carrying
out Factory Reset, consult your dealer or
your nearest Roland Service.