Filter
Top Products
Parameter Settings
TENORI-ON Manual 103
Setting Parameters with the Jog Dial ■ Interior Menu
4. Saver Time
Sets the amount of time that must elapse before saver operation begins.
If the TENORI-ON is not operated for the time specified here, the type of operation specified
by the Saver Type item will begin.
■ Range . . . . . . . . . . . .OFF, 1 — 1440 (minutes)
■ Default . . . . . . . . . . . 10 (minutes)
■ LED Buttons . . . . . . . No display
5. Time Signal ON/OFF
Determines whether an hourly chime will be played during Interior Mode operation. When
ON, the chime will sound on the hour at 00 minutes and 00 seconds. The total chime
playback time is 8 seconds. Performance data created on the TENORI-ON can be used in
place of the standard hourly chime (➝ Page 104: Save As Time Signal).
■ Range . . . . . . . . . . . .ON, OFF
■ Default . . . . . . . . . . . OFF
■ LED Buttons . . . . . . . No display
6. Alarm ON/OFF
Determines whether the alarm will sound during Interior Mode operation. The total alarm
playback time is 48 seconds. Performance data created on the TENORI-ON can be used in
place of the standard alarm (➝ Page 105: Save As Alarm).
■ Range . . . . . . . . . . . .ON, OFF
■ Default . . . . . . . . . . . OFF
■ LED Buttons . . . . . . . No display
Saver Time ∞
10 min
Time Signal ∞
ON
Alarm ∞
ON