Filter
Top Products
Parameter Settings
TENORI-ON Manual 73
Setting Parameters with the Jog Dial ■ File Menu
3. Current Block
Provides access to Current Block file operations.
"Current Block" files include active notes and settings such as voice, tempo, etc., for all
layers in the current block.
The following 4 Current Block file functions are provided:
● Load Current Block
Loads a Current Block file that has been saved to an SD Memory Card into the TENORI-ON.
When a block is loaded the layer settings for all other blocks will also be overwritten by the loaded
data.
1 Make sure the block that you want to load the data into is selected on the TENORI-ON
(Function Button [R5]: Page 34).
2 Insert the SD Memory Card containing the file you want to load into the TENORI-ON
card slot.
3 Use the jog dial and [OK] button to navigate to the Current Block function menu as
follows:
"Main menu" ➝ "File menu" ➝ "Current Block"
4 Use the jog dial to highlight the "Load" function, then press the [OK] button.
5 Current Block files on the card will appear as a list on the LCD display (with no file
extension). Use the jog dial to select the file you want to load.
● Only files that are in Current Block format will be displayed.
6 Press the [OK] button to load the selected file.
The display shown below will appear while the file is being loaded.
Press the [OK] or [CANCEL] button to cancel the load operation.
Load Current Block Page 73
Save Current Block Page 74
Rename Current Block Page 75
Delete Current Block Page 77
Block[01]: ∞
Operation: Load
Current Block Number
Block[01]: Load ∞
0302E-BLOCK-01
0302E-BLOCK-02
0302G-BLOCK-01