Filter
Top Products
The TENORI-ON Is …
TENORI-ON Manual 13
Performance Modes Basic Operation
Basic Settings and Editing During Performance
● [CLEAR] button
Press the [CLEAR] button to clear all active notes from the layer.
● Function Button Settings/Edits
Basic settings and edits are made during performance using the [L1] — [L5] functions
buttons, [R1] — [R5] functions buttons, and LED buttons.
[Reference]
❊
Using the Function Buttons . . . . . . . . . . . . . . . . . TENORI-ON Quick Guide,
Setting Parameters with the Function Buttons ➝ Page 23
Clear All Active Notes from the Layer Press the [CLEAR] button briefly.
Clear All Active Notes from All Layers and
Blocks
Press and hold the [CLEAR] button.
Changing Voices
Use the LED buttons while holding the [L1] button (
➝ Page 24).
Change Note Length
Use the LED buttons while holding the [L2] button (
➝ Page 25).
Change the Octave
Use the LED buttons while holding the [L3] button (
➝ Page 26).
Change the Score Mode Loop Range
Use the LED buttons while holding the [L4] button (
➝ Page 27).
Rotate Shape in the Random Mode
Use the LED buttons while holding the [L4] button (
➝ Page 28).
Adjust Loop Speed
Use the LED buttons while holding the [L5] button (
➝ Page 29).
Change Layers
Use the LED buttons while holding the [R1] button (
➝ Page 30).
Change the Tempo
Use the LED buttons while holding the [R2] button (
➝ Page 31).
Transposition
Use the LED buttons while holding the [R3] button (
➝ Page 32).
Adjust the Layer Volume
Use the LED buttons while holding the [R4] button (
➝ Page 33).
Change Blocks, Copy Layer, Copy Block
Use the LED buttons while holding the [R5] button (
➝ Page 34).