Filter
Top Products
Parameter Settings
TENORI-ON Manual 94
Setting Parameters with the Jog Dial ■ File Menu
●
Save Samplings
Saves a Samplings file currently loaded in a user memory to an SD Memory Card in ".tnw"
format.
1 Insert an SD Memory Card that has sufficient free space for the file to be saved into the
TENORI-ON card slot.
2 Use the jog dial and [OK] button to navigate to the Samplings function menu as follows:
"Main menu" ➝ "File menu" ➝ "Samplings"
3 Use the jog dial to highlight the "Save" function, then press the [OK] button.
4 A display that allows you to specify the user memory containing the sample to be saved
will appear. Use the jog dial to select the desired user memory (1 — 3), then press the
[OK] button.
● In this display "User1," "User2," and "User3" correspond to user memory numbers <01/16,> <02/16,>
and <03/16.> The bottom line on the LCD displays the name of the sample file currently loaded in that
user memory. If the user memory is empty, "--------" will be displayed.
5 The file name entry display will appear. A current file name will be displayed, which you
can either use as-is or replace with a different name.
File name entry procedure is described in the Rename Song section on Page 65.
● File names can be up to 16 characters in length. The file extension will be added automatically.
Samplings: ∞
Operation: Load
Samplings: ∞
Operation: Save
Samplings: Save ∞
Sour.= User1
[1-SAMPLE ]
Input File Name ∞
[1-SAMPLE ]
ABCDEFGHIJKLMNOPQRST
UVWXYZ-0123456789 ª§
Current User Voice File Name
Available Characters
Input Cursor
Set File Name
Backspace & Delete 1 Character