Filter
Top Products
The TENORI-ON Is …
TENORI-ON Manual 14
Performance Modes Basic Operation
• Menu Settings/Edits
Detailed TENORI-ON settings can be accessed and edited by using the jog dial to select
menu items on the LCD display. File save and load operations can also be accessed this
way.
[Reference]
❊
Using the Menus . . . . . . . . . . . . . . . . . . . . . . . . . Setting Parameters with the Jog Dial ➝ Page 36
More detailed menu settings than listed in the above chart are described in the
following pages. Understand all the possibilities offered by the TENORI-ON can help
you gain maximum enjoyment from the instrument.
Stop Playback
Press the [OK] button at the point you want to stop playback while the Status
Display is shown. Press the [OK] button a second time and playback will
resume from that point.
Adjust Overall Volume
Use the jog dial and [OK] button to go to the "Hardware Volume" display (
➝
Page 43).
Mute Output
Use the jog dial and [OK] button to go to the "Mute" display (
➝ Page 47).
Adjust Layer Panning
Use the jog dial and [OK] button to go to the "Panpot" display (
➝ Page 53).
Apply a Reverb or Chorus Effect
Use the jog dial and [OK] button to go to the "Effect menu" display (
➝
Page 99).
Change the Light Animation
Use the jog dial and [OK] button to go to the "Animation" display (
➝ Page 53).
Clear All Active Notes from the Layer
Press the [CLEAR] button briefly. Alternatively, use the jog dial and [OK] button
to go to the "Clear this layer" display (
➝ Page 57).
Clear All Active Notes from All Layers and
Blocks
Press and hold the [CLEAR] button. Alternatively, use the jog dial and [OK]
button to go to the "Clear All Blocks" display (➝ Page 57).
Reset All Layers and Blocks
Use the jog dial and [OK] button to go to the "Reset All Blocks" display (
➝
Page 58).
Copy Active Notes
Use the jog dial and [OK] button to go to the "Copy this block" display (
➝
Page 55) or "Copy this layer" display (
➝ Page 56).
Change Scales
Use the jog dial and [OK] button to go to the "Master Scale" display (
➝
Page 44).
Adjust MIDI Tone Generator Tuning
Use the jog dial and [OK] button to go to the "Master Tuning" display (
➝
Page 60).
Reset the Playback Loop
Use the jog dial and [OK] button to go to the "Reset Loop Timing" display (
➝
Page 46).
Determines whether notes played on the
TENORI-ON will sound via the internal tone
generator or not
Use the jog dial and [OK] button to go to the "Local Control" display (
➝
Page 61).
Adjust the LED Button Long-press Time
Use the jog dial and [OK] button to go to the "Push Sensitivity" display (➝
Page 60).
File Operations
Use the jog dial and [OK] button to go to the "File menu" display (
➝ Page 62).
Format an SD Memory Card
Use the jog dial and [OK] button to go to the "SD Format" display (
➝
Page 107).
Factory Reset
Use the jog dial and [OK] button to go to the "Factory Reset" display (
➝
Page 108).
Record a performance
Use the jog dial and [OK] button to go to the "Recording Menu" display
(
➝Page 109).