Filter
Top Products
Parameter Settings
TENORI-ON Manual 74
Setting Parameters with the Jog Dial ■ File Menu
7 When the Current Block file has been loaded the display shown in step 3, above, will
appear, and playback of the Current Block file will begin.
Press the [OK] button in the status display when you want to stop playback.
● Save Current Block
Saves a Current Block file containing all active notes and settings such as voice, tempo, etc.,
for all layers in the current block to an SD Memory Card.
1 Insert an SD Memory Card that has sufficient free space for the file to be saved into the
TENORI-ON card slot.
2 Use the jog dial and [OK] button to navigate to the Current Block function menu as
follows:
"Main menu" ➝ "File menu" ➝ "Current Block"
3 Use the jog dial to highlight the "Save" function, then press the [OK] button.
4 The file name entry display will appear. A default file name will be provided, which you
can either use as-is or replace with a name of your own.
File name entry procedure is described in the Rename Song section on Page 65.
● File names can be up to 16 characters in length. The file extension will be added automatically.
Block[01]: ∞
"0302E-BLOCK-02 "
Loading... CANCEL
Current Block Number
The name of the Current Block file
being loaded.
Block[01]: ∞
Operation: Load
Block[01]: ∞
Operation: Save
Input File Name ∞
[0302E-BLOCK-02 ]
ABCDEFGHIJKLMNOPQRST
UVWXYZ-0123456789 ª§
Current Block File Name
Available Characters
Input Cursor
Set File Name
Backspace & Delete 1 Character