Filter
Top Products
Parameter Settings
TENORI-ON Manual 106
Setting Parameters with the Jog Dial ■ System Menu
■ System Menu
The System menu provides access to functions related to basic system operation, such as
factory reset, SD Memory Card formatting, and others.
The System menu submenu includes the following 5 items.
Use the jog dial to highlight a submenu item, then press the [OK] button to go to the
corresponding parameter edit display.
1. Save As Default
Saves the current settings for all blocks and layers as the power-on defaults that will be
automatically recalled when the TENORI-ON is turned on. If this function is not used to save
any user settings as defaults, the initial factory settings are used.
Press the [OK] button while this display is showing to save the current settings as the power-
on defaults.
When you press the [OK] button "Saving …" will appear on the display while the data is
being saved.
File data may be irreparably corrupted if you turn off the power or remove the SD Memory Card while
the "Saving…" display is showing.
● Press the [CANCEL] button (or use the jog dial to select "CANCEL" on the LCD and then press the [OK]
button) if you want to cancel the operation.
■ Range . . . . . . . . . . . .OK, CANCEL
■ Default . . . . . . . . . . . OK
■ LED Buttons . . . . . . . No display
1. Save As Default Page 106
2. SD Format Page 107
3. Owner Name Page 107
4. Version Check Page 108
5. Factory Reset Page 108
[System menu] ∞
SaveAs Default
SD Format
Owner Name
SaveAs Default ∞
OK