Filter
Top Products
Parameter Settings
TENORI-ON Manual 57
Setting Parameters with the Jog Dial ■ Edit Menu
4. Clear this Layer
Clears all active notes from the current block and layer. This produces the same result as
briefly pressing the [CLEAR] button.
Rotate the jog dial to display "OK" if it isn’t already showing, then press the [OK] button.
To cancel the clear operation either press the [CANCEL] button or rotate the jog dial to
display "CANCEL" and press the [OK] button.
● This function clears the active notes, but leaves Random Mode rotation data unaffected and active. The LED
buttons can not be used to enter notes while rotation is active. Refer to Rotation (➝ Page 28) for information
on stopping rotation.
■ Range . . . . . . . . . . . .OK, CANCEL
■ Default . . . . . . . . . . . OK
■ LED Buttons . . . . . . . Animation displayed when clear executed
5. Clear All Blocks
Clears all active notes from all blocks and layers. This produces the same result as pressing
the [CLEAR] button (long press).
Rotate the jog dial to display "OK" if it isn’t already showing, then press the [OK] button.
To cancel the clear operation either press the [CANCEL] button or rotate the jog dial to
display "CANCEL" and press the [OK] button.
■ Range . . . . . . . . . . . .OK, CANCEL
■ Default . . . . . . . . . . . OK
■ LED Buttons . . . . . . . Animation displayed when clear executed
Clear this Layer ∞
Block[01] Layer[01]
OK
Current Block Number
Current Layer Number (the layer to be cleared)
Clear All Blocks ∞
OK