Filter
Top Products
Parameter Settings
TENORI-ON Manual 84
Setting Parameters with the Jog Dial ■ File Menu
6 When the All Settings file has been loaded the display shown in step 2, above, will
appear, and playback of the existing active notes will begin using the All Settings data
just loaded.
Press the [OK] button in the status display when you want to stop playback.
● Save All Settings
Saves an All Settings file containing all settings such as voice, tempo, etc., for all layers and
blocks to an SD Memory Card. Active notes are not included.
1 Insert an SD Memory Card that has sufficient free space for the file to be saved into the
TENORI-ON card slot.
2 Use the jog dial and [OK] button to navigate to the All Settings function menu as follows:
"Main menu" ➝ "File menu" ➝ "All Settings"
3 Use the jog dial to highlight the "Save" function, then press the [OK] button.
4 The file name entry display will appear. A default file name will be provided, which you
can either use as-is or replace with a name of your own.
File name entry procedure is described in the Rename Song section on Page 65.
● File names can be up to 16 characters in length. The file extension will be added automatically.
5 When the file name has been entered as required use the jog dial to highlight the "
§
"
symbol in the lower right corner of the display and press the [OK] button.
The file name will be entered and the save function will be executed.
All Settings: ∞
Operation: Load
All Settings: ∞
Operation: Save
Input File Name ∞
[0302E-SET-02 ]
ABCDEFGHIJKLMNOPQRST
UVWXYZ-0123456789 ª§
Current All Settings File Name
Available Characters
Input Cursor
Set File Name
Backspace & Delete 1 Character