Filter
Top Products
Parameter Settings
TENORI-ON Manual 46
Setting Parameters with the Jog Dial ■ Play Menu
6. Master Loop Point
Sets the loop points (TOP and END) for all layers and blocks.
The loop includes the TOP and END points.
The TOP and END points are set via the LED buttons, and the jog dial moves the entire loop
range backward or forward.
● The END point cannot be moved to a position before (to the left of) the TOP point. The END point can be
moved to the same location as the TOP point, which will produce a 1-beat loop.
■ Range . . . . . . . . . . . .TOP = 1 — 16, END = 1 — 16
■ Default . . . . . . . . . . . TOP = 1, END = 16
■ LED Buttons . . . . . . . The TOP point is indicated by a lit half-column on the upper half of the matrix, and the END
point is indicated by a lit half-column on the lower half of the matrix, as shown below. The
TOP and END points are set via the LED buttons.
[Reference]
❊
Function Button [L4] (➝ Page 27)
7. Reset Loop Timing
Resets the current playback position to the TOP of the loop for all layers and blocks.
■ Range . . . . . . . . . . . .OK, CANCEL
■ Default . . . . . . . . . . . OK
■ LED Buttons . . . . . . . No display
Master Loop Point ∞
TOP: 5 / END:15
TOP Position END Position
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
END PointTOP Point
Reset Loop Timing ∞
OK