Filter
Top Products
Parameter Settings
TENORI-ON Manual 85
Setting Parameters with the Jog Dial ■ File Menu
A display like the one shown below will appear while the All Settings file is being saved.
You can cancel the operation by pressing the [OK] or [CANCEL] button.
File data may be irreparably corrupted if you turn off the power or remove the SD Memory Card while the
"Saving…" display is showing.
●
If a file with the same name exists on the SD Memory Card an overwrite confirmation display like the
one shown below will appear.
● Press the [OK] button if it’s OK to overwrite the file. Press the [CANCEL] button (or use the jog dial to
select "CANCEL" on the LCD and then press the [OK] button) to cancel the operation and leave the
original file unaltered.
6 The display shown in step 3, above, will reappear when the operation has finished.
● Rename All Settings
Allows a new name to be entered for an All Settings file on an SD Memory Card.
1 Insert the SD Memory Card containing the file you want to rename into the TENORI-ON
card slot.
2 Use the jog dial and [OK] button to navigate to the All Settings function menu as follows:
"Main menu" ➝ "File menu" ➝ "All Settings"
3 Use the jog dial to highlight the "Rename" function, then press the [OK] button.
4 All Settings files on the card will appear as a list on the LCD display (with no file
extension). Use the jog dial to select the file you want to rename.
● Only files that are in All Settings format will be displayed.
Settings: ∞
"1-SET1020-01 "
Saving... CANCEL
The All Settings file being saved.
Settings: ∞
"1-SET1020-01 "
Already Exists!
Overwrite? OK
All Settings: ∞
Operation: Load
All Settings: ∞
Operation: Rename
Settings: Rename ∞
0302E-SET-01
0302E-SET-02
0302G-SET-01