Filter
Top Products
The TENORI-ON Is …
TENORI-ON Manual 8
Connecting to Second TENORI-ON or Computer
Connecting Two TENORI-ON Instruments
Connecting More than Two TENORI-ON Instruments
Power-on Procedure
If you have the TENORI-ON connected to an external sound system, it is important to turn
the devices in your audio chain on in the correct order to prevent unwanted noise as well as
possible damage to your equipment.
Before turning the power on, make sure that any volume controls on all devices are turned all
the way down.
When turning power on, you should normally begin with the source and end with power
amplifiers or powered speakers. Here’s an example:
1. TENORI-ON 2. Mixer 3. Powered Speakers
The opposite applies when turning power off:
1. Powered Speakers 2. Mixer 3. TENORI-ON
MIDI
MIDI OUT
MIDI IN
MIDI
MIDI OUT
MIDI IN
Synchronize ∞
SLAVE
Synchronize ∞
MASTER
Supplied MIDI Cable
Adaptor
MASTER TENORI-ON SLAVE TENORI-ON
MIDI Cable
Supplied MIDI
Cable Adaptor
MIDI
MIDI OUT
MIDI OUT
MIDI OUT
MIDI IN
MIDI
MIDI OUT
MIDI IN
MIDI
MIDI OUT
MIDI IN