Filter
Top Products
The TENORI-ON Is …
TENORI-ON Manual 17
Performance Modes Random Mode
Random Mode
The Random Mode is assigned to layers 8 — 11.
If you press an LED button long enough to enter an active note in the Random Mode, the
active note will play back repeatedly. If you then enter a few more active notes, the lights will
"travel" from note to note, in the order entered, and the active notes will sound when the
traveling light passes over them. The Random Mode thus produces a totally different type of
loop from the Score Mode.
[Reference]
❊
The next active note will play at the specified 1-beat timing. The length of each beat can be adjusted via the
Loop Speed parameter (Loop Speed ➝ Page 29, 51. Master Loop Speed ➝ Page 45).
You can even spin loop-shapes you create in the Random Mode by holding the [L4] button
and running a finger around the matrix in the direction and at the speed of the desired spin.
The pitches of the notes will change accordingly as the shape spins, producing loop sound
effects.
[Reference]
❊
Rotation ➝ Page 28
Press an LED button briefly to play the sound assigned to it. If you hold the LED button a bit
longer it will remain lit and will become an active note. Press and hold an active note to de-
activate it (the LED button will go out).
[Reference]
❊
The press-and-hold time for note entry can be changes as required. (Push Sensitivity ➝ Page 60)
❊ The note length (gate time) can be changed as required. (Sound Length ➝ Page 25, 52)
As in the Score Mode the factory default scale for the vertical axis is an ionian scale,
corresponding to the white keys on a piano. Nothing is assigned to the horizontal axis, but
the timing between notes will depend on the distance between the notes on the matrix.
[Reference]
❊ Selecting a scale other than the ionian scale. (Master Scale ➝ Page 44)
❊ Changing octaves. Octave ➝ Page 26)
❊ Changing the light animation. (Animation ➝ Page 53)
Random Mode Operation