Filter
Top Products
Parameter Settings
TENORI-ON Manual 25
Setting Parameters with the Function Buttons [L2] Sound Length
[L2] Sound Length
Sets the note length (gate time) for all active notes in the current layer.
While holding the [L2] button slide your finger horizontally over the matrix to move the lit
vertical line to the desired setting, or simply press an LED button at the appropriate column.
Moving the line to the right increases the note length.
The LED buttons adjust the Sound Length in the increments listed below. You can also use
the jog dial for finer adjustment in +/-10 millisecond increments.
● Depending on the voice used, setting a shorter Sound Length may have no effect, or changing the Sound
Length may result in inconsistent sound. Also, the maximum length of user voices is 0.97 seconds, and
setting a longer Sound length will have no effect.
■ Range . . . . . . . . . . . .10 msec — 9990 msec
■ Default . . . . . . . . . . . 100 msec (all layers)
[Reference]
❊
Layer menu/Sound Length (➝ Page 52)
10-50
60-100
110-200
210-300
310-400
410-500
510-600
610-800
810-1000
1010-2000
2010-3000
3010-4000
4010-5000
5010-6000
6010-8000
8010-9990
50
100
200
300
400
500
600
800
1000
2000
3000
4000
5000
6000
8000
9990
Values selected via the LED buttons.
Matrix display related to settings made via the jog dial.
Sound Length ∞
Layer[01]
100msec
Gate Time
Current Layer Number