Filter
Top Products
The TENORI-ON Is …
TENORI-ON Manual 19
Performance Modes Bounce Mode
Bounce Mode
The Bounce Mode is assigned to layer 14.
Press an LED button and the light will "drop" from that button, bounce back from the bottom
of the matrix, and repeat. The corresponding note will sound when the light bounces at the
bottom row.
The higher the entry point, the longer the interval between the sound. By choosing
appropriate entry points you can set the repeat interval as required.
[Reference]
❊
The illuminated dots move at a speed corresponding to the timing of the LED buttons: i.e. 1 beat per dot.
(Loop Speed ➝ Page 29, 51. Master Loop Speed ➝ Page 45).
In the Bounce Mode the pitches are arranged horizontally. As in the Score Mode the factory
default scale is an ionian scale, corresponding to the white keys on a piano, with the lowest
pitch on the left and the highest on the right.
Press the lowest LED button to stop activity in that column.
[Reference]
❊
Selecting a scale other than the ionian scale. (Master Scale ➝ Page 44)
❊ Changing octaves. (Octave ➝ Page 26)
❊ The note length (gate time) can be changed as required. (Sound Length ➝ Page 25, 52)
Bounce Mode Operation