Filter
Top Products
Parameter Settings
TENORI-ON Manual 50
Setting Parameters with the Jog Dial ■ Layer Menu
2. Volume
Sets the volume of individual layers (layer volume common to all blocks).
LED button matrix display and operation are the same as for the [R4] button.
The LED buttons can be used to set the volume of all 16 layers.
The LED buttons adjust the volume in the increments shown below, while the jog dial can be
used for fine adjustment.
■ Range . . . . . . . . . . . .0 — 127
■ Default . . . . . . . . . . . 96 (all layers)
■ LED Buttons . . . . . . . Each row of LED buttons corresponds to a layer, while the horizontal axis corresponds to
volume level (refer to the illustration below). The LED buttons can be used to adjust the
volume of the corresponding layer.
[Reference]
❊
Function Button [R4] (➝ Page 33)
Volume ∞
Layer[01]
96
Volume
Current Layer Number
16
15
14
13
12
11
10
09
08
07
06
05
04
03
02
01
0
10
20
30
40
48
56
64
72
80
88
96
104
112
120
127
0
1-10
11-20
21-30
31-40
41-48
49-56
57-64
65-72
73-80
81-88
89-96
97-104
105-112
113-120
121-127